Henry M. Jackson Federal Building

HENRY M. JACKSON FEDERAL BUILDING

Seattle, Washington, United States

RETROFIT

ORIGINAL

UPDATE THIS PROJECT PROFILE

By Joe Mabel / By Joe Mabel, CC BY-SA 3.0, https://commons.wikimedia.org/w/index.php?curid=3177483

OWNER –

DEVELOPER –

DESIGN ARCHITECT –

EXECUTIVE ARCHITECT –

ENGINEER –

CONSTRUCTION MANAGER –

GENERAL CONTRACTOR –

FACADE CONSULTANT –

FACADE CONTRACTOR –

ENERGY USE INTENSITY –

COMPLETION 2007

BUILDING TYPE Office

Height 487 ft148 m

Floors 37

GFA 810,393 ft²75,288 m²

RETROFIT TYPE Selective Enhancement

RETROFIT FACADE DESIGN

Precast Concrete

CERTIFIED + RATINGS

LEED Certified

PRE-PROJECT GOALS

PRE-RETROFIT DESIGN STUDIES

OTHER SYSTEMS INCLUDED IN THE RETROFIT

HVAC and/or mechanical systems
Daylighting controls

EXTENT OF THE FACADE INTERVENTION

Insulation was added

**This building is registered as a historic landmark

DESCRIPTION
The Henry M. Jackson Federal Building is located in Seattle, Washington, USA. Built in 1973, the 37-story building underwent a renovation in 2007 that included the addition of insulation on exterior walls.

OWNER

DEVELOPER

DESIGN ARCHITECT
Bassetti Architects; John Graham & Associates

EXECUTIVE ARCHITECT

ENGINEER
Magnusson Klemencic Associates

CONSTRUCTION MANAGER

GENERAL CONTRACTOR
Hoffman Construction Co. of Washington

FACADE CONSULTANT

FACADE CONTRACTOR

OTHER CONSULTANT/CONTRIBUTOR

ENERGY USE INTENSITY –

COMPLETION 1974

BUILDING TYPE –

Height 487 ft148 m

Floors 37

GFA 810,393 ft²75,288 m²

ORIGINAL FACADE DESIGN

SOURCES

GSA
Skyscraper Center http://www.skyscrapercenter.com/building/henry-m-jackson-federal-building/9675
Mc Kistry
photo by Joe Mabel, CC BY-SA 3.0,